Configuring Setup Setting

in Setup menu.

Port Settings

In the Port Settings menu (Figure 18), this page will display each port’s status. Press the ID parameter to set each port’s Speed, Flow Control, QoS and Link Status. When you need to renew the posted information, press the “Refresh” button.

The Link Status in the screen will display the connection speed and duplex mode; otherwise this dialog box will display down when the port is disconnected.

Figure 18. Port Configuration

To change the port setting, click on the ID parameter to enter the selected port to configure its Speed/Disable and Flow control.

Figure 19. Port Settings.

NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide

25

YML842 Rev1

 

Page 25
Image 25
NetComm NP2500 manual Configuring Setup Setting, Port Settings, Setup menu