NetComm NP2500 manual Gigabit Ethernet Port Status LEDs

	Red	When the PoE port have the following failure happens:
		• PoE power circuit shortage.
		• Power over current: over the power current of PD’s classification.
		• Out of PoE voltage of 44 ~ 57 VDC output.
		• Cause fail.
	Off	No PoE powered device (PD) connected or unplugged the PoE output
		port.
Gigabit Ethernet Port Status LEDs
Link/ACT:	On	When the Link/ACT LED lights on, the respective port is successfully con-
Link/Activity		nected to an Ethernet network.
	Blinking	When the Link/ACT LED is blinking, the port is transmitting or receiving
		data on the Ethernet network.
	Off	There is no link.
1000Mbps	On	When the 1000Mbps LED lights on, the respective port is connected to a
		1000Mbps Gigabit Ethernet network.
	Off	When the respective port is connected to a 10Mbps Ethernet or 100Mbps
		Fast Ethernet network.
100Mbps	On	When the 100Mbps LED lights on, the respective port is connected to a
		100Mbps Fast Ethernet network.
	Off	When the respective port is connected to a 10Mbps Ethernet or
		1000Mbps Gigabit Ethernet network.

16	NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide
	YML842 Rev1