NetComm NP2500 manual Features

Features

•2 x 1000BASE-T Gigabit Ethernet ports

•Compliant with 802.3af specification

•Supports PoE power up to 15.4W for each PoE port

•Supports PoE power maximum 170W for the device

•Supports PoE Powered Device (PD) classification identify

•Each port supports auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port

•Full-duplex transfer mode for speed of 10Mbps, 100Mbps and 1000Mbps

•Half- duplex transfer mode for speed of 10Mbps and 100Mbps

•Wire speed reception and transmission

•Store-and-Forward switching scheme capability to support rate adaptation and ensure data integrity

•Up to 4K unicast addresses entities per device, self-learning, and table aging

•768KBytes packet buffer

•Supports IEEE 802.3x flow control for full-duplex mode ports

•Supports Back-pressure flow control for half-duplex mode ports

•Supports Port-based VLAN

•Supports Port-based Trunking

•Supports Port-mirroring

•Supports Port-setting for Speed/Disable, Flow control and Port based QoS (Quality of Service)

•Easy configuration via Web Browser

•Easy setting via Web Management Utility

•Standard 19” Rack-mount size

NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide	7
YML842 Rev1