NetComm NP2500 Mirror Setting, Forward it to the sniffer port, RX receive mode, Sniffer port

Mirror Setting

ing packet from one port of a network switch to another port where the packet can be studied. It enables the manager to keep close track of switch performance and alter it if necessary.

Configuring the port mirroring by assigning a source port from which to copy all packets and a sniffer port where those packets will be sent.

The selections of the sniffer mode are as follows:

TX (transmit) mode:	This mode will duplicate the data transmitted from the source port and
	forward it to the sniffer port.
RX (receive) mode:	This mode will duplicate the data sent to the source and forward it to the
	sniffer port.
Both modes:	(transmit and receive) This mode will duplicate both the data transmitted
	from and data sent to the source port, then it will forward the data to the
	sniffer port.

Figure 24. Mirror Setting.

NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide	29
YML842 Rev1