Trap Setting
Address of the manager where the trap is to be sent.
| Figure 32. Trap Setting |
System Events: | Monitoring the system’s trap. |
Device Bootup: | a trap when booting up the system. |
Illegal Login: | a trap when there is using a wrong password login, and it will record |
| from where the IP to be login. |
Twisted Pair Port Events: | Monitoring the twisted pair port status. |
Abnormal* Receive Error: | a trap when there are receive data error in twisted pair port. |
Abnormal* Transmit Error: | a trap when there are transmit data error in twisted pair port. |
Abnormal*: | 50 error packet count within 10 seconds. |
PoE Events: | Monitoring the PoE ports status. |
PoE Power fail: | A trap when the port’s power source fails or the PD64012 fails. |
Power on/Power off: | A trap when the PoE port’s power is on and down. |
Power over current: | A trap when the PoE port’s power is over current. |
Power short circuit: | A trap when the PoE port’s power circuit was short. |
Power threshold on/off: | A trap when the radio of the system power supply larger than or smaller |
| than the System power Threshold setting. |
NP2500 | 35 |
YML842 Rev1 |
|
