Samsung 570VTFT Screen is blank Monitor is using its power PowerSaver, Management system, Driver

Appendix

Table 5. Troubleshooting problems – Image (Continued )

What you see...	Suggested Action	Reference
Screen is blank and	The monitor is using its power	PowerSaver,
power indicator light is	management system.	page 19.
steady amber or blinks	Move the computer’s mouse or
every 0.5 or 1 seconds	press a key on the keyboard
Image is not stable and	Check that the display resolution	Display Mode,
may appear to vibrate	and frequency from your PC or video	page 17.
	board is an available mode for your	Display Modes,
	monitor. On your computer check:
		page 26.
	Control Panel, Display, Settings
	If the setting is not correct, use your	Installing the Video
	computer utility program to change	Driver, page 7.
	the display settings.
	NOTE: Your monitor supports multiscan display functions
	within the following frequency domain:
	Horizontal frequency:	30 kHz ~ 61 kHz
	Vertical frequency:	50 Hz ~ 75 Hz
	Maximum refresh rate:	1024 x 768 @ 75 Hz
Image is not centered	Adjust the horizontal and vertical	H-Position, page 14.
on the screen	position.	V-Position, page 14.
You need the monitor	Download the driver from the internet at:
driver software	http://www.samsung-monitor.com
	http://www.samsungmonitor.com (USA only)

English 21