Maintenance of Your LCD monitor, Attaching a base | Samsung 570VTFT

Appendix

Attaching a base

NOTE: This monitor accepts a 75mm x 75mm VESA-compliant mounting interface pad.

Rear cover mounting pad

Mounting interface pad

1	Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and
	secure it with the four screws that came with the arm-type base, wall mount hanger or

other base.

Maintenance of Your LCD monitor

WARNING: To avoid risk of electric shock, do not disassemble the monitor cabinet (except for gaining access to the cable connectors as described on page 6). Users cannot service the monitor. User maintenance is restricted to cleaning as explained below:

Unplug the monitor from the power outlet before cleaning.

To clean your LCD screen, lightly dampen a soft, clean cloth with water or mild detergent. If possible, use a special screen cleaning tissue or solution suitable for the antistatic coating.

To clean the monitor cabinet, use a cloth lightly dampened with a mild detergent. Never use ﬂammable cleaning material to clean your LCD or any other electrical apparatus.

English 28

Image 30

Samsung 570VTFT manual Maintenance of Your LCD monitor, Attaching a base, Rear cover mounting pad Mounting interface pad

Contents

SyncMaster 570V TFT SyncMaster 560V TFT Page Table of Contents Safety Instructions Do not Open Unpacking Your Monitor Setting up Your Monitor Setting up an Ergonomic WorkstationKensington Security Slot Successfully installed Connecting Your LCD MonitorJack to the DC power port on the back of your monitor Or graphics card MIC OUT jack Connecting Your Multimedia LCD MonitorName Description Attached power Card Installing the Video Driver Plug and PlayWindows Version 4.00.950B Self-Test Feature Check StfcVersion 4.00.950A PROPERTIES, Monitor tab, have Disk Getting Help Warm-up TimeMonitor Adjusting Your LCD Monitor User Controls Direct-Access Features Auto AdjustmentAutomatic Save Brightness Setting slidebar Numeric value IndicatorOn Screen Display OSD OSD Lock/Unlock Accessing the menu system OSD functions and adjustmentsBrightness Contrast Position Color ResetTemperature Color Control Menu Display LanguageMenu Position Time Display Mode This screen shows the horizontal and vertical Adjusts the volume of the high sound Adjusts the volume of the low soundLeft Decrease volume Right Increase volume Audio Controls PowerSaver Appendix Troubleshooting Management system Screen is blank Monitor is using its power PowerSaverDisplay Mode Move the computer’s mouse or Raise the volume Sound level is Troubleshooting problems AudioConnecting your Check the volume control on Documentation Your computer or sound Speciﬁcations Red Green Green + H/V Sync Blue Pin D-sub connectorPin Assignments DDC Data Horizontal Sync Not used Vertical Sync DDC Clock Preset timing modes Display Mode Horizontal Vertical Pixel Clock Sync PolarityDisplay Modes Removing the base Turn off your monitor and unplug its power cordChanging the Base Screen Maintenance of Your LCD monitor Attaching a baseRear cover mounting pad Mounting interface pad Index IC Compliance Notice Regulatory InformationFCC Information MPR II Compliance Printed on recyclable paper Canada