IR Blaster Pairing
1.When you turn the IR Blaster on, the LED blinks.
2.Briefly point the IR Blaster toward the IR sensor of the TV and press the PAIRING button at the bottom.
3.The connection icons appear on the bottom left of the screen, and the TV connects to IR Blaster automatically.
✎✎ If the connection process failed, please turn off and on the IR Blaster, try again from step 2.
OPEN
PAIRING
ON
OFF
•• IR Blaster PAIRING Reset button.
PENO
✎✎ To set an Universal Remote Control after pairing an IR Blaster, select Yes.
To use IR Blaster, universal remote control setup needs to be complete. Do you want to continue with setup?
YesNo
[[Precautions for Using an IR Blaster
To use an IR Blaster, the IR Blaster must be located nearby with external devices connected to the TV. Note that it should be no obstacle between the external device's IR receiver and an IR Blaster.
