Samsung 920XT manual Rear, The locking device has to be purchased, separately, you purchase it

/ SOURCE button	Push the 'SOURCE', then selects the video signal while the OSD is off.
	(When the SOURCE button is pressed to change the input mode, a
	message appears in the upper left of the screen displaying the current
	mode -- Analog or MagicNet input signal.)

AUTO button

Power button []

Power indicator

Use this button for auto adjustment. >> Click here to see an animation clip

Use this button for turn the monitor on and off.

Be careful as pressing the Power button in client mode will shut down Windows XPe. Be careful that if you force shut down Windows it may cause damage.

In these cases your monitor will be forcefully shut down and this may cause damage to your operating sysetm. Therefore ensure that the EWF function is enabled.

1.Turn the power off by holding down the Power button after switching to Monitor mode from Client mode.

2.Turn the power off by holding down the Power button for more than five(5) seconds in Client mode.

When unable to boot up your computer because of a Windows crash, please contact your Administrator.

This light glows green during normal operation, and blinks green once as the monitor saves your adjustments.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

Rear

The configuration at the back of the monitor may vary from product to product.

POWER IN port	Connect the power cord for your monitor to the power port on the back of
	the monitor.
VGA IN port	Connect the signal cable to the 15-pin, D-sub port on the back of your
	monitor.
RS-232C Connection	Connect a RS-232C cable to this terminal.
Terminal
VGA OUT port	Connect a monitor to another monitor through a D-Sub cable.
Kensington Lock	The Kensington lock is a device used to physically fix the system when
	using it in a public place.
	The locking device has to be purchased
	separately.
	For using a locking device, contact where
	you purchase it.
Cable Fix Ring	When connecting the cable is finished, fix the cables to the Cable Fix
	Ring.