Samsung 920XT manual Server Requirement, PowerSaver When used as a normal monitor

Server Requirement
	Connect Client No	CPU	RAM	Ethernet	OS
Minimum	Just can load Server	P3 400MHz	64Mbyte	100Mbps	windows 2003
SPEC	Program				Server
Recommend	1	P4 1.0GHz	256Mbyte
SPEC
	2~4	P4 2.4GHz	512Mbyte		windows 2003
				100Mbps
					Server
	5~7	P4 3.0GHz	1Gbyte
	8~10	P4 3.2GHz	2Gbyte

The content presented above is the result of testing a specific server. The information may change as the server may be different. For some products, the OS may not be supported. When purchasing a product, make sure to check whether or not the OS is supported.

USB

Local Device (USB) Connection Speed

When booting up a monitor, a blank screen may appear for 3 ~ 4 seconds until the MagicNet screen appears.

If you turn the monitor off while booting, it may damage the product.

Local Device (USB) compatibility

HID(Human Interface Devices) : Keyboard, Mouse

MSC(Mass Storage Class), Devices using the SCSI(Small Computer System Interface) command set, FAT(File Allocation Table) System

Exception

Some manufacturers have wrongly specified their device to be USB standard compatible. Our product has exception handling procedures.

But Some devices are unlikely to work properly.

Some manufacturers have wrongly specified their device to be SCSI compatible. Such devices are unlikely to work properly.

It is recommended that USB devices are purchased after they are tested and confirmed to be compatible.

PowerSaver

PowerSaver (When used as a normal monitor)

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

State	Normal Operation	Power saving mode	Power off
			(Power button)
Power Indicator	Green	Green, Blinking	Black
Power Consumption	Less than 70 W	Less than 4 W	Less than 4 W