Samsung 950P, 950p Plus, 750p, 950p, 950p plus manual Appendix, PowerSaver

Appendix

PowerSaver

This monitor has a built-in power management system called PowerSaver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The available modes are “On,” “Standby,” “Suspend,” and “Off”.

This power management system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. See the table below for details.

Table 1. Power-saving modes

State	Normal		Power-Saving Function mode (EPA/NUTEK)
	Operation
			Standby Mode	Suspend Mode	Power-off Mode
				Position A1	Position A2
Horizontal Sync	Active		Inactive	Active	Inactive
Vertical Sync	Active		Active	Inactive	Inactive
Video	Active		Blanked	Blanked	Blanked
Power	Green		Amber	Amber/Green	Amber
Indicator				Blinking	Blinking
				(0.5 sec interval)	(1 sec interval)
Power	750p :
Consumption	120W	(Max.)
	100W	(Nom.)	60W(Nom.)	Less than 15W	Less than 3W
	950p / 950p PLUS :
	130W	(Max.)
	110W	(Nom.)

NOTE: This monitor automatically returns to normal operation when horizontal and vertical sync return. This occurs when you move the computer’s mouse or press a key on the keyboard.

This monitor is EPA ENERGY STAR® compliant and NUTEK compliant when used with a computer equipped with VESA DPMS functionality.

For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

22