Installing a Filter Option | Samsung A6 specs

Installing a Filter (Option)

The air conditioner can be fitted with a deodorizing and Bio-Pure filter to remove minute dust particles or odours. The service life of the filter is approximately three months depending on the time during which the air conditioner is used.

1Remove the vinyl packing from the filter.

Note	Do not remove the packing from a deodorizing filter until you
	wish to use the filter, as it will lose its properties.

2Insert the filter in the filter holder and press the three insert tabs until you hear a click.

3Open the front grille by pulling on the tabs on the lower right and left sides of the indoor unit.

ENGLISH

Deodorizing filter

Bio-Pure Filter

4Take out the existing filter and replace it with the new one.

E-23

Image 23

Samsung A6 installation manual Installing a Filter Option

Contents

Installation Manual Manual DE Instrucciones Safety Precautions Contents Indoor Unit View of the Unit Outdoor Unit Remote Control Buttons and Display Getting Started Inserting the Remote Control Batteries To obtain an Using with the indoor unitSelecting with the Remote Control Way Function Selecting the Automatic Operating Mode Cooling Your Room Changing the Room Temperature Quickly Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Horizontally Adjusting the Air Flow Direction Vertically To Cancel the On Timer Setting the On Timer To Cancel the Off Timer Setting the Off Timer To Cancel the Sleep Timer Setting the Sleep Timer Topic Recommendation Operating Recommendations If the air conditioner is used at... Then Temperature and Humidity RangesMode Outdoor Temperature Indoor Temperature Indoor Humidity Model AS07A5A6MA / AS09A5A6MA / AS12A5A6MC Cleaning Your Air Conditioner AUTO, Cool Solving Common Problems Installing a Filter Option Model Technical Specifications Outdoor Unit Installation Manual Electrical Work Indoor Unit Deciding on Where to Install the Air Conditioner 30mm1inch or more Accessories in the Outdoor Unit Case Air Conditioner and AccessoriesAccessories in the Indoor Unit Case Then follow Steps Fixing the Installation Plate Purging the Unit Connecting the Assembly Cable 07/09/12 To install the drain hose, proceed as follows Installing and Connecting the Indoor Unit Drain Hose Torque Installing and Connecting the Indoor Unit Assembly PipingPipe Depth a Cutting/Extending the Piping 18/24 Connecting the Cables to the Outdoor Unit07/09 Electrical Work Auxiliary Circuit Breaker 5019 Checking Correct Earthing Fixing the Unit in Position If you have used Then Connecting Up and Purging the Circuit Performing Leak Tests To check for gas leaks on Then, using a leak detector Check Placing the Indoor Unit in Position Checking and Testing Operations Explaining Operations to the Owner Electronics