Paradyne 12000E installation instructions Installing Your Interface Modules

Models: 12000E

1 24
Download 24 pages 36.07 Kb
Page 9
Image 9

Installing Your Interface Module(s)

Interface modules provide the subscriber connections for an 12000E; up to twelve interface modules may be installed in the 12000E (slots 1–12). There are a variety of models available for purchase; contact your sales representative for further information or visit www.paradyne.com for a list of available products. Any combination of interface module models may be installed in an 12000E as long as they are supported by the model type and version number of your management module; refer to the Release Notes for your particular management module model for compatibility information.

Procedure

1.Select a slot for installation. Although the 12000E is factory shipped with Slot 1 open, interface modules may be installed in any slot, 1–12.

CAUTION:

If a slot cover is removed from slot 2–12, it must be replaced with an interface module. DO NOT OPERATE YOUR 12000E WITH AN EMPTY MODULE SLOT.

2.With the interface module PCB facing right and the interface module model name upright, align the upper and lower edges of the PCB with the slot module guides.

INTERFACE

MODULE

Slot Module Guides

IPD1-A2-GZ40-10

July 2005

9

Page 9
Image 9
Paradyne 12000E installation instructions Installing Your Interface Modules