If there is visible damage, do not attempt to connect the device. Contact your sales representative.
Installation Options
The 12000E BLC is designed for installation in a Restricted Access area where admittance is limited to trained and authorized service personel. It may be installed on a tabletop or in a rack.
Installation on a Tabletop
Insert the four provided rubber bumper screws into the mounting holes at the bottom of the 12000E chassis for surface grip and airflow. Position and secure all connecting cables such that they will not become a tripping hazard or pull loose from the chassis. Ensure that the air supply vents around the top and bottom edges of the chassis are not blocked.
12000E BOTTOM VIEW
RUBBER BUMPER
SCREW
SideTop
Front | Rear |
4 | July 2005 |
