4.Using a Phillips screwdriver, remove the left-hand screw from the chosen terminal block (labeled "+" on the chassis). Slide the ring terminal of your positive power lead around the shaft of the screw and insert the screw into the same "+" terminal from which it was removed.
Positive (+) Terminal | POSITIVE POWER LEAD |
DC POWER TERMINAL | Ring Terminal |
5.Remove the right-hand screw (labeled "–") from the same terminal block. Slide the ring terminal of your NEGATIVE lead around the shaft of the screw and re-insert the screw into the same "–" terminal from which it was removed.
Negative (–) Terminal NEGATIVE POWER LEAD
DC POWER TERMINAL | Ring Terminal |
CAUTION:
Observe proper polarity.
6.Connect both power leads to a fuse panel. The negative (–) lead connects to a "Batt" (Battery) terminal and the positive (+) lead connects to a "Return" terminal on your DC power supply.
IPD1-A2-GZ40-10 | July 2005 | 13 |
