PREPARING THE INSTALLATION

Deciding on Where to Install the Air Conditioner

When deciding on the location of the air conditioner with the owner, the following restrictions must be taken into account.

General

Do NOT install the air conditioner in a location where it will come into contact with the following elements:

Combustible gases

Saline air

Machine oil

Sulphide gas

Special environmental conditions

If you must install the unit in such conditions, first consult your dealer.

Indoor Unit

There must be no obstacles near the air inlet and outlet.

Install the indoor unit on a surface that can support its weight.

Choose a position that enables the piping and cables to be easily connected to the outdoor unit and the recommended length of 5m (16ft. 5in) to be respected (15m (49ft.3in) maximum).

Leave enough clearance beneath the indoor unit to enable the filters to be removed without hindrance.

Maintain sufficient clearance around the indoor unit, as indicated in the diagram on the page opposite.

Make sure that the water dripping from the drain hose runs away correctly and safely.

Outdoor Unit

The outdoor unit must NEVER be placed on its side or upside down, as the compressor lubrication oil will run into the cooling circuit and seriously damage the unit.

Choose a location that is dry and sunny, but not exposed to direct sunlight or strong winds.

Do not block any passageways or thoroughfares.

Choose a location where the noise of the air conditioner when running and the discharged air do not disturb any neighbours.

Choose a position that enables the piping and cables to be easily connected to the indoor unit and the recommended length of 5m (16ft. 5in) to be respected (15m (49ft.3in) maximum).

Install the outdoor unit on a flat, stable surface that can support its weight and does not generate any unnecessary noise and vibration.

Position the outdoor unit so that the air flow is directed towards the outside, as indicated by the arrows on the top of the unit.

Maintain sufficient clearance around the outdoor unit, as indicated in the diagram on the page opposite.

If the outdoor unit is installed at a height, ensure that its base is firmly fixed in position; the maximum height is 7m (23ft).

Make sure that the water dripping from the drain hose runs away correctly and safely.

CAUTION

You have just purchased a split-type room air conditioner and it has been installed by your installation specialist.

This device must be installed according to the national electrical rules.

When the outdoor temperature is below 40°F(4°C), turn the main power off.

E-30

Page 30
Image 30
Samsung AD18B1C09 installation manual Deciding on Where to Install the Air Conditioner, Indoor Unit

AD18B1C09 specifications

The Samsung AD18B1C09 is an exceptional air conditioning unit that brings together cutting-edge technology and user-friendly design to create a comfortable environment in your home or office. This model stands out for its efficient performance and robust features tailored to meet various climate control needs.

One of the primary highlights of the AD18B1C09 is its impressive cooling capacity. It is designed to deliver rapid cooling even in large spaces, ensuring that every corner of the room reaches the desired temperature quickly. This makes it an ideal choice for areas that experience high temperatures, providing instant relief during hot summer months.

Energy efficiency is another hallmark of the AD18B1C09. With a high Energy Efficiency Ratio (EER), this air conditioner helps users save on electricity bills while minimizing their carbon footprint. The unit is equipped with advanced inverter technology, which adjusts the compressor speed based on the cooling demand. This not only enhances efficiency but also ensures quieter operation compared to traditional air conditioning systems.

The Samsung AD18B1C09 comes with a range of user-friendly features that enhance convenience. Its remote control functionality allows users to operate the unit from a distance, adjusting settings such as temperature, fan speed, and mode with ease. Additionally, smart features like programmable timers and sleep modes optimize energy use and enhance comfort without constant oversight.

Moreover, the unit is designed with a multi-stage filtration system that improves indoor air quality. This system effectively removes dust, allergens, and other impurities from the air, making it a great choice for individuals with allergies or respiratory concerns. The filters are easily accessible for maintenance, ensuring that the air quality remains consistently high.

In terms of design, the Samsung AD18B1C09 features a sleek and modern aesthetic that blends seamlessly with any interior decor. Its compact dimensions allow for versatile installation options, whether mounted on walls or placed in window units, providing flexibility to meet different spatial requirements.

Overall, the Samsung AD18B1C09 air conditioner combines powerful cooling capabilities, exceptional energy efficiency, and user-centric design, making it a top choice for those seeking reliable climate control solutions. This model truly embodies Samsung's commitment to innovation and quality in the realm of home appliances.