Selecting the Automatic Operating Mode
You can start the air conditioner in AUTO mode.
1If necessary, press the ON/OFF( ) button.
Result: ◆ The power indicator on the control panel comes on.
◆The indoor unit beeps twice.
◆ The operation mode previously set is displayed. ◆ The air conditioner starts up in the mode selected
when the unit was last used.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Switched on
◆Stopped
It will start up normally after a
2If the AUTO COOL indicator is not displayed, press MODE button one or more times until it appears.
Result: ◆ The indoor unit beeps each time you press MODE.
◆The air conditioner starts up in AUTO mode.
To operate the unit by remote control, press the AUTO COOL button.
Note | In AUTO mode, the optimum fan speed is selected automatically |
| and cannot be changed. |
◆You can change modes at any time.
3To control the air flow direction when necessary, refer to page 14.