Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.
1 If necessary, press the 
button.
Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selected
when the unit was last used. The indoor unit beeps.
IMPORTANT The air conditioner is tted with a protection mechanism
|
|
| to prevent the unit from being damaged when it is started |
|
|
| immediately after being: |
|
|
| Plugged in |
|
|
| Stopped |
|
|
| lt will start up normally after three minutes. |
|
|
|
|
2 If the | is not displayed at the top of the remote control,press the | ||
|
|
| button on the remote control one or more times until it appears. |
Result: The indoor unit beeps each time you press the 
button. The air conditioner runs in the Dry mode.
Note You can change modes at any time.
3To adjust the temperature, press the 
button one or more times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: Each time you press the 
button: - The temperature is adjusted by 1°C - The indoor unit beeps
The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically.
The fan is running in auto mode.
4 To control the direction of the air flow, refer to pages 15.
E
