Temperature and Humidity Ranges

The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use.

MODE

OPERATING CONDITIONS

IF OUT OF CONDITIONS

 

Indoor temp: 16°C~32°C

- A safety device will stop continuously the

 

system functioning;

 

 

COOL

Indoor humidity: below 80%

- Condensation may occur on the indoor unit

 

Outdoor temp: 21°C~43°C

with risk to have either water blow off or drops

 

on the floor;

 

 

HEAT

Indoor temp: below 27°C

- A safety device will stop continuously the

 

Outdoor temp: 0°C~24°C

system functioning;

 

 

 

 

 

 

 

Indoor temp: 16°C~32°C

- A safety device will stop continuously the

 

system functioning;

 

 

DRY

Indoor humidity: below 80%

- Condensation may occur on the indoor unit

 

Outdoor temp: 18°C~43°C

with risk to have either water blow off or drops

 

on the floor;

 

 

POWER SUPPLY

Single phase rated voltage

220V-240V~50Hz

minimum and maximum limit

198V min.-264V max.

 

Any damage occurs out of condition specified cannot be covered by product warranty.

If the system works continuosly outside of conditions, its performace and reliability will be compromised.

Operating Recommendations

When you use your air conditioner, it is recommended that you read the following:

Topic

Recommendation

 

 

Heating capacity

The heat pump inside the air conditioner absorbs heat from outside air and brings itindoors.

 

If the temperature of the outside air drops, the air conditioner heats less. If the room is not warm

 

enough, use an additional heating appliance.

 

 

Warm air circulation

The air conditioner circulates warm air to heat your room. It will take some time to warm

 

the air in your room entirely after the air conditioner turns on.

 

Therefore, turn the air conditioner on in advance.

 

 

Frost

When you select the Heat mode, frost may form in the outdoor unit due to low temperature

 

and high humidity.

 

If this happens:

 

The heating operation is stopped.

 

The air conditioner defrosts automatically for about 7 minutes. After about 7 minutes,

 

the air conditioner starts operating again normally.

 

 

High indoor and

If both the indoor and outdoor temperatures are high when you select the Heat mode,

outdoor temperatures

the fan and the compressor of the outdoor unit may stop periodically.

 

This is normal; wait until the air conditioner turns on again.

 

 

Power failure

If a power failure occurs when the air conditioner is operating, the air conditioner will turn off.

 

When the power returns, the air conditioner will start up again automatically.

 

 

Protection mechanism

When the air conditioner is started immediately after being plugged in or stopped,

 

the normal operation starts up after 3 minutes for the reason of protection.

E-26

Page 26
Image 26
Samsung AQ09FKN, AQ09NSAN, AQ09NSDX, AQ09NSDN, AQ12NSDX, AQ12NSDN Temperature and Humidity Ranges, Operating Recommendations

AQ12NSAX, AQ09NSDN, AQ09NSBN, AQ12FKN, AQ12NSAN specifications

Samsung has long been a leader in the air conditioning sector, consistently delivering cutting-edge technology and performance. The latest models, including the AQ09SAX, AQ09NSAX, AQ12NSBN, AQ09NSBX, and AQ09NSANEUR, showcase the brand’s commitment to energy efficiency, advanced cooling technologies, and user-centric features that enhance comfort and convenience.

The Samsung AQ09SAX and AQ09NSAX models are designed with a focus on sustainability, featuring a high energy efficiency rating that significantly reduces electricity consumption. Both units utilize advanced digital inverter technology, which allows for precise temperature control while minimizing energy waste. This not only helps in cutting down utility bills but also contributes to a smaller carbon footprint.

The AQ12NSBN model stands out with its robust cooling performance, making it ideal for larger spaces. With a powerful compressor and optimized airflow design, it ensures consistent and rapid cooling while maintaining an ultra-quiet operation. This model is perfect for residential and commercial settings where noise levels can be a concern.

The AQ09NSBX offers the added benefit of smart technology integration. With the SmartThings app, users can remotely control their air conditioning settings, monitor energy usage, and schedule operation times. This level of connectivity enhances the user experience by making it easier to maintain optimal indoor conditions from anywhere.

Another notable feature across these models is the advanced filtration system. Equipped with a high-efficiency particulate air (HEPA) filter, these air conditioners are adept at removing pollutants, allergens, and particulate matter from the air, promoting a healthier living environment. Additionally, the self-cleaning function reduces maintenance efforts, as it helps eliminate dust and mold build-up within the unit.

The AQ09NSANEUR model brings a unique design aesthetic, combining style with functionality. It features a sleek exterior that can seamlessly blend into modern interiors while offering powerful cooling and heating capabilities. With the capacity to operate efficiently in both hot and cold climates, these models are versatile and dependable year-round.

In summary, the Samsung AQ series air conditioners, including the AQ09SAX, AQ09NSAX, AQ12NSBN, AQ09NSBX, and AQ09NSANEUR, provide an impressive range of features designed to maximize comfort and efficiency. With their advanced cooling technologies, energy-saving capabilities, and user-friendly connectivity options, these air conditioning solutions embody Samsung’s commitment to innovation and excellence in climate control.