Hold Error: | The protective circuit in the unit activates |
| when the temperature inside the |
| automatic disc changer exceeds 60°C |
| (140°F), stopping all operation. |
| ➪ Cool down the unit by opening |
| the windows or turning on the air |
| conditioner. As the temperature falls |
| below 60°C (140°F), the disc will start |
| playing again. |
No Name: | Attempted to display DNPS during the CD |
| play having no disc names preset. |
Waiting: | Radio text data is being received. |
Load: | Discs are being exchanged in the Disc |
| changer. |
Reading: | The unit is reading the data on the disc. |
IN (Blink): | The CD player section is not operating |
| properly. |
| ➪ Reinsert the CD. If the CD cannot be |
| ejected or the display continues to flash |
| even when the CD has been properly |
| reinserted, please switch off the power |
| and consult your nearest service center. |
Protect (Blink): The speaker wire has a
➪Wire or insulate the speaker cable properly and press the reset button.
Unsupported File:
An Audio file is played with a format that this unit can’t support.
➪
Copy Protection:
A
➪
Can’t Download:
Download Error:
This unit does not work properly for some reason.
➪Press the reset button to download it again. If this error is still displayed, consult a local Kenwood dealer.
No Display File:
No file that can be downloaded is contained in the
➪Make sure that a files created with referring to <http://www.kenwood.net- disp.com> is contained in the
Incorrect File: The file selected to be downloaded has a format that this unit cannot read.
➪Recreate the file.
Writing Error: Writing failed while the file was downloaded.
➪Try the downloading again.
DEMO MODE (Blink):
The Demonstration mode has been selected.
➪The <Demonstration mode Setting> (page 46) is ON. Turn it OFF.
English 57
05.11.15 2:36:04 PM |
