Tuner features
Station Preset Memory
Putting a station in the memory.
1Select the band
Push the Control knob towards [FM] or [AM].
2Select the frequency to put in the memory Push the Control knob towards [4] or [¢].
3Select the key function section Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are displayed above the [1] — [6] buttons.
Refer to <Notes on
4Put the frequency in the memory
Press the desired [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button.
Auto Memory Entry
Putting stations with good reception in the memory automatically.
1Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM].
2Open Auto Memory Entry
Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.
•When the <AF (Alternative Frequency)> (page 42) is ON, only RDS stations are put in the memory.
•When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band are not put in the memory.
Likewise, when Auto Memory Entry is done in the FM3 band, RDS stations preset in FM1 or FM2 are not put in the memory.
Preset Tuning
Recalling the stations in the memory.
1Select the band
Push the Control knob towards [FM] or [AM].
2Select the key function section Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are displayed above the [1] — [6] buttons.
Refer to <Notes on
3Recall the station
Press the desired [1] — [6] button.
26 English
05.11.15 2:35:49 PM |
