Equalizer Control
1Select the source to adjust Press the [SRC] button.
2Select the key function section Press the [NEXT] button.
Repeatedly press the button until "EQ" is displayed above the [3] button.
Refer to <Notes on
3Enter Equalizer Control mode Press the [3] ("EQ") button.
•When "2 ZONE" of <Audio Setup> (page 12) is ON, you cannot select "EQ".
4Select the Equalizer Control item to adjust Press a [1] — [3]/[5] button.
Equalizer Control Item | ||||
[1] | "SYS.Q" |
|
| System Q Setting |
[2] | "F" |
|
| Equalizer Front Setting |
[3] | "R" |
|
| Equalizer Rear Setting |
[5] | "Preset" | [1] | "RCL" | Recall mode |
|
| [2] | "MEM" | Memory mode |
•"Preset": You can store an adjusted equalizer control value by selecting "MEM". Refer to <Memory mode> (page 17). Also, you can recall it by selecting "RCL". Refer to <Memory Recall mode> (page 17).
5Adjust the Equalizer control item
System Q Setting (Sound Type)
Push the Control knob towards [4] or [¢].
Each time you push the knob, the setting alternates between the settings shown in the table below.
Sound setting | Display |
User memory | "USER" |
Natural | "NATURAL" |
Rock | "ROCK" |
Pops | "POPS" |
Easy | "EASY" |
Top 40 | "TOP 40" |
Jazz | "JAZZ" |
•User memory:
The values set on the <Audio Control> (page 11).
•Change each setting value with the <Sound Management system> (page 14).
First, select the speaker type with the Speaker setting.
Equalizer Front Setting/
Equalizer Rear Setting
1 Select a frequency band you wish to adjust.
Press the [2] ("F") or [3] ("R") button. Each time you press the button, the band alternates between "Band 1" and "Band 4".
2 Select the items to adjust for Equalizer.
Push the Control knob towards [FM] or [AM]. Each time you push the knob, the item to be adjusted alternates between the items shown in the table below.
3 Adjust the Equalizer.
Push the Control knob towards [4] or [¢].
Each time you push the knob, the setting alternates between the settings shown in the table below.
Equarizer adjustment item | Range |
Equalizer Front Frequency/ | Refer to the followings. |
Equalizer Rear Frequency |
|
Equalizer Front Level/ | |
Equalizer Rear Level |
|
Equalizer Front Quality/ | 0.25/ 0.50/ 1.00/ 2.00 |
Equalizer Rear Quality |
|
•The frequency which can be selected by each Frequency band is shown below.
Band | Frequency |
Band1 | 60/ 80/ 100/ 120/ 160/ 200 Hz |
Band2 | 250/ 315/ 400/ 500/ 630/ 800/ 1k Hz |
Band3 | 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 kHz |
Band4 | 5/ 6.3/ 8/ 10/ 12.5/ 16 kHz |
•To get the best sound, first set the Cabin Setting and Speaker Select Front/Rear parameters using the <Sound Management system> (page 14).
6Exit Equalizer Control mode Press the [6] ("RTN") button.
English 15
05.11.15 2:35:43 PM |
