Memory mode
Storing the values of Field Control in memory.
1Adjust the item you wish to put in memory By referring to <Sound Field Control> (page 12), <Sound Management system> (page 14), and <Equalizer Control> (page 15), adjust the item you wish to put in the memory.
2Select the Preset Memory item Press the [5] ("Preset") button.
3Enter Memory mode
Press the [2] ("MEM") button.
4Put in the memory
Press the [1] ("MEM.1")/ [2] ("MEM.2") button for at least 2 seconds.
5Exit Memory mode
Press the [6] ("RTN") button.
•"MEM.1": When you press the Reset, all the sources will be the setting value which is registered.
•The following items cannot be registered. System Q Setting, Position Setting
Memory Recall mode
Recall the value in the memory by the memory mode.
1Select the source to adjust Press the [SRC] button.
2Select the key function
Press the [1]("S.F.C")/[2]("S.M.S")/[3]("EQ") button.
Refer to <Notes on
3Select the Preset Memory item Press the [5] ("Preset") button.
4Enter recall mode
Press the [1] ("RCL") button.
5Select the recall item
Press the [1] ("RCL 1")/ [2] ("RCL 2") button for at least 2 seconds.
"RCL 1": Recall the value put in "MEM.1" by <Memory mode> (page 17).
"RCL 2": Recall the value put in "MEM.2" by <Memory mode> (page 17).
6Exit Memory Recall mode Press the [6] ("RTN") button.
English 17
05.11.15 2:35:44 PM |