Dolby Laboratories KDC-W8534 Sound Field Control, Enter Audio Setup mode, General features

General features

Audio Setup

Setting the Sound system, such as Volume offset and Dual Zone.

1Select the source to adjust Press the [SRC] button.

2Enter Audio Setup mode

Press the [VOL] knob for at least 1 second.

3Select the Audio Setup item to adjust Press the [VOL] knob.

Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.

4Setup the Audio item Turn the [VOL] knob.

Adjustment Item	Display	Range
Volume offset	"Vol-Offset"	–8 — ±0
Dual Zone System	"2 ZONE"	OFF/ON

•Volume offset: Sets each source’s volume as a difference from the basic volume.

•Dual Zone System

Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.

-Set up the channel of sub source by <Dual Zone System Setting> (page 40).

-Select Main source by [SRC] button.

-Adjust the volume of Front channel by [VOL] knob.

-Adjust the volume of Rear channel by <Audio Control> (page 11).

-The Audio Control has no effect on sub source.

•You can use the Dual Zone System with the Auxiliary input sources listed below.

-Internal auxiliary input

•You can use the Dual Zone System only when you have set the rear speaker to any mode other than "None" in the <Sound Management system> (page 14).

•When the "2 ZONE" is ON, ignore the following setups.

-<Sound Field Control> (page 12)

-<Sound Management system> (page 14)

-<Equalizer Control> (page 15)

-<WOW Control> (page 16)

-<Bypass Control> (page 16)

•ODD D/A System is not effective when the "2 ZONE" is ON.

5Exit Audio Setup mode

Press the [VOL] knob for at least 1 second.

12 English

Sound Field Control

1Select the source to adjust Press the [SRC] button.

2Select the key function section Press the [NEXT] button.

Repeatedly press the button until "S.F.C" is displayed above the [1] button.

Refer to <Notes on Multi-function Key System> (page 9).

3Enter Sound Field Control mode Press the [1] ("S.F.C") button.

•When "2 ZONE" of <Audio Setup> (page 12) is ON, you cannot select "S.F.C".

4Select the Sound Field Control item to adjust

Press a [1] — [3] and [5] button.

Each time you press the [1] — [3] and [5] button, the adjustable audio item alternates between the ranges of all stage section’s tables on the following pages.

Multi-function key operation			Sound Field control item
[1]	"XOver"	"HPF-F Fc"*	Front High Pass Filter
		"HPF-R Fc"*	Rear High Pass Filter
		"LPF-SW Fc"*	Subwoofer Low Pass Filter
[2]	"DTA"	"DTA-F SP"	DTA Front
		"DTA-R SP"	DTA Rear
		"DTA-SW"	DTA Subwoofer
[3]	"POSI"	"Position"	Position Setting
[5]	"Preset"	[1] "RCL"	Recall mode
		[2] "MEM"	Memory mode

•* The following adjustment items can be selected by [FM] or [AM] knob for "XOver".

[1]"XOver" [FM] or [AM] Knob

"HPF-F Fc"	Front High Pass Filter Center
"HPF-F Slope"	Front High Pass Filter Slope
"HPF-R Fc"	Rear High Pass Filter Center
"HPF-R Slope"	Rear High Pass Filter Slope
"LPF-SW Fc"	Subwoofer Low Pass Filter Center
"LPF-SW Slope"	Subwoofer Low Pass Filter Slope
"SW Phase"	Subwoofer Low Pass Filter Phase

B64-3304-00_01_E_English.indd 12 05.11.15 2:35:41 PM