Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time you press the button, the Attenuator turns ON and OFF.
When the Attenuator is ON, "ATT" is displayed.
Audio Control
1Select the source to adjust Press the [SRC] button.
2Enter Audio Control mode Press the [VOL] knob.
3Select the Audio item to adjust Press the [VOL] knob.
Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.
4Adjust the Audio item Turn the [VOL] knob.
Adjustment Item | Display | Range |
Rear Volume *1 | "Rear Volume" | 0 — 35 |
Subwoofer level*2,3 | ||
Balance | "Balance" | Left 15 — Right 15 |
Fader*3 | "Fader" | Rear 15 — Front 15 |
Exit Audio Control mode (Volume control mode)
•*1 You can control this item when "2 ZONE" of <Audio Setup> (page 12) is set to "ON".
•*2 You can control this item when Speaker Select Subwoofer of <Sound Management system> (page
14)is set to any item other than "None".
•*3 You can control this item when <Subwoofer Output> (page 11) is set to "SW ON".
•*3 You can control this item when "2 ZONE" of <Audio Setup> (page 12) is set to "OFF".
5Exit Audio Control mode Press any button.
Press a button other than the [VOL] knob, [ANG] and [ATT] button.
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Push the Control knob toward [AM] for at least 2 seconds.
Each time you press the button, Subwoofer output switches ON and OFF.
When it is ON, "SW ON" is displayed.
•You can control this item when Speaker Select Subwoofer of <Sound Management system> (page
14)is set to any item other than "None".
•You can control this function when "2 ZONE" of <Audio Setup> (page 12) is set to "OFF".
English 11
05.11.15 2:35:41 PM |
