Pioneer DV-533K, DV-440 DTS Out, KHz PCM Out, Mpeg Out, Digital Out Expert

DTS Out

This player is capable of outputting DTS digital audio for DVDs recorded in DTS. When this player is connected to an AV component that has a built-in DTS decoder, select [DTS]. If your system is not equipped to decode DTS, select [Off]. Refer to the operating instructions supplied with your audio components if you are unsure about compatibility with DTS.

Audio1	A2 Video1 V2	Language	General
	Audio DRC	— Off
	Dolby Digital Out	— Dolby Digital
	DTS Out	Off
	96kHz PCM Out	DTS
	MPEG Out — MPEG 3PCM
Change DTS output mode
	Move		SETUP	Exit

Settings: Off*

DTS

*Factory setting

Note

If you have made digital audio connections to component(s) not equipped to decode the DTS digital bitstream, be sure to select [Off]. If a DTS signal is output without decoding, the output is digital noise that could potentially cause damage to your speakers.

96 kHz PCM Out

This player is capable of outputting digital signals with a sampling frequency of 96 kHz. If you have made connections to a component capable of processing this signal rate, select [96 kHz] for the signal to be output as is. As some components are incapable of processing digital signal input with sampling rates of 96 kHz, selecting [96 kHz 3 48 kHz] compresses the signal to a standard signal with a sampling rate of 48 kHz.

Audio1 A2 Video1 V2 Language General

Audio DRC	— Off
Dolby Digital Out	— Dolby Digital
DTS Out	— Off
96kHz PCM Out		96kHz 348kHz
MPEG Out		96kHz
Change 96kHz output mode
Move		SETUP Exit

Settings: 96 kHz 3 48 kHz* 96 kHz

*Factory setting

Note

On DVDs that contain copy protection, the 96 kHz signal may only be output from the analog audio jacks.

MPEG Out

This player is capable of outputting the MPEG digital bitstream. When the player is connected to an AV component that has a built-in MPEG decoder, select the [MPEG] setting. Otherwise, select [MPEG 3 PCM] to convert the digital signal to the PCM signal, the digital signal output from a CD.

Audio1	A2 Video1 V2	Language General
	Audio DRC	— Off
	Dolby Digital Out	— Dolby Digital
	DTS Out	— Off
	96kHz PCM Out	— MPEG
	MPEG Out	MPEG 3PCM
Change MPEG audio output mode
	Move	SETUP	Exit

Settings: MPEG

MPEG 3 PCM*

*Factory setting

Digital Out Expert

–DVD/Super VCD/VCD/CD

Depending on your preferences and the type of connections made, you may opt not to have the digital audio signal output at all. When this setting is set to [Off] there is no signal output from the digital audio output jacks.

Make changes to the [Digital Out] setting in the Setup screen Audio 1 menu in the [Expert] menu mode (page 25).

Audio1 A2 Video1 V2 Language General

Audio DRC — Off

Dolby Digital Out — Dolby Digital

DTS Out — Off

96kHz PCM Out — 96kHz 348kHz MPEG Out — MPEG 3PCM

Digital Out On

Off

Move SETUP Exit

Settings: On* (Digital bitstream is output)

Off (Digital bitstream is not output)

*Factory setting

ADJUSTING AUDIO AND VIDEO SETTINGS

27

En