Audio Connections
This player features two digital (optical and coaxial) and also analog audio output formats.
Digital Audio Connections
You can enjoy the digital audio recorded on DVD discs from both optical digital and coaxial digital output jacks.
DIGITAL OUT COAXIAL
The digital signal is transmitted electronically through a coaxial cable.
•Use to connect to an AV amplifier or receiver with
•Use a coaxial cable (not supplied) to connect the DIGITAL OUT COAXIAL (coaxial digital output) on the player to the coaxial digital input on an AV amplifier or receiver.
When making digital audio connections, do not make connections from both the coaxial and optical digital outputs to the same component.
When a DVD recorded in Dolby Digital, DTS, or MPEG is loaded, noise will be output if you have made connections via the digital audio jacks to a receiver or amplifier that cannot decode a Dolby Digital, DTS, or MPEG digital bitstream. In this case, be sure to set up the Setup Navigator audio settings to best reflect the type of system you are using (page 19). Additionally, the digital audio settings can be adjusted manually in the Setup screen Audio 1 menu (pages 26, 27).
DIGITAL OUT OPTICAL
The digital signal is transmitted as light pulses through a
CONTROL | VIDEO OUT | COMPONENT | AUDIO OUT | |
|
| VIDEO OUT |
|
|
| S | Y |
|
|
IN | PB | R | L | |
PR
AV amplifier or receiver with
DIGITAL IN
DIGITAL OUT
OPTICAL COAXIAL
AC IN
DIGITAL OUT
OPTICAL COAXIAL
MAKING CONNECTIONS
•Use to connect to an AV amplifier or receiver with
•Use a
CONTROL | VIDEO OUT | COMPONENT | AUDIO OUT | DIGITAL OUT | |
|
| VIDEO OUT |
|
| OPTICAL COAXIAL |
| S | Y |
|
| AC IN |
IN | PB | R | L |
| |
PR
AV amplifier or receiver with
MPEG decoder |
| DIGITAL OUT | |||||||
OPTICAL COAXIAL | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIGITAL IN
Analog Audio Connection
•When using a microphone, connect like this.
•Make analog audio connections to a stereo amplifier or receiver.
•Analog audio connections can also be made to a TV or monitor with stereo input jacks.
•Use the supplied audio cord to connect the AUDIO OUT on the player to the audio input on the stereo amplifier or receiver.
•When making analog audio connections, be sure to match the color of the plugs with the color of the jacks (red and white).
CONTROL | VIDEO OUT | COMPONENT | AUDIO OUT | DIGITAL OUT | |
|
| VIDEO OUT |
|
| OPTICAL COAXIAL |
| S | Y |
|
| AC IN |
IN | PB | R | L |
| |
PR
AUDIO OUT
R L
Stereo amplifier or receiver
AUDIO IN
R L
15
En
