6.If you turned off the water supply, turn it back on.
For a replacement water fi lter, you can visit your local home Improvement center or contact the Samsung Parts distributor.
Be sure the replacement water fi lter has the SAMSUNG logo on the box and on the water fi lter.
Link : http://www.samsungparts.com
Removing any residual matter inside the water supply line after installing the water filter.
1.Turn ON the main water supply and supply water from water supply line.
2.Run water through the dispenser until the water runs clear (approx. 6 to 7 minutes). This will clean the water supply system and remove air from the lines.
3.Additional fl ushing may be
required in some households.
4. Open the Refrigerator door and make sure there are no water leaks coming from the water
fi lter.
Be sure to fl ush the dispenser thoroughly, otherwise water may drip from the dispenser. This means that there is still air in the line.
Reverse Osmosis Water Supply
IMPORTANT : The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa).
If a reverse osmosis water fi ltration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa.)
If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa):
•Check to see whether the sediment fi lter in the reverse osmosis system is blocked. Replace the fi lter if necessary.
•Allow the storage tank on the reverse osmosis system to refi ll after heavy usage.
•If your refrigerator has a water fi lter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water fi lter.
If you have questions about your water pressure, call a licensed, qualifi ed plumber.
CONTROLLING THE TEMPERATURE
Basic temperature of Freezer and Refrigerator Compartments
The basic temperature and/or recommended temperatures of the Freezer and Refrigerator Compartments are
Controlling the Freezer temperature
Recommend Temp (Freezer) : -2F
The Freezer temperature can be set between
Controlling the fridge temperature
The fridge temperature can be set between 46°F and 34°F to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature will move 2°F degrees with each press (38°F → 36°F
→34°F → 46°F → 44°F → 42°F → 40°F → 38°F). The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be refl ected in the digital display.
operating _15
02 OPERATING
2013.3.4 1:33:10 PM |
