Serves two purposes, Door Alarm Function

	( 3 ) Alarm /	The Alarm/Hold 3 sec for Filter Reset button
	hold 3	serves two purposes:
	sec for	- To turn the door open alarm on and off
	Filter	- To reset the water ﬁ lter life indicator.
	Filter	1) Door Alarm Function
	Reset	1) Door Alarm Function
	Reset	If the door alarm is set to On, an alarm
		If the door alarm is set to On, an alarm
		beeps if any refrigerator door is left open
	(Filter Reset)	for more than three minutes.
		The beeping stops when you close the
		door. The door alarm function is pre-set
	(Blue) (Red)	to On in the factory. You can turn it off by
		pressing and then releasing the Alarm/
		Hold button. You can turn it back on
		in the same fashion. The icon lights up
		when the function is on.

2)Water Filter Life Indicator Function

After you replace the water ﬁ lter, press and hold the Alarm/Hold 3 sec for Filter Reset button to re-set the water ﬁ lter life indicator. When you re-set the water ﬁ lter life indicator, the Filter icon on the panel turns blue, green, or yellow.

The Filter icon will turn red to let you know it is time to change the water ﬁ lter after six months (about 300 gallons).

Some areas have large amounts of lime in their water, which causes the water ﬁ lter to clog more quickly. If this is the case in your area, you will have to change the ﬁ lter more frequently than every six months.

	( 4 ) Lighting	Pressing the Lighting button turns on the
	( 4 ) Lighting	Dispenser LED lamp (under the display)
		Dispenser LED lamp (under the display)

	( 6 ) Ice Off	If you don’t want to make more ice, press the
	(Hold 3	If you don’t want to make more ice, press the
	(Hold 3	Ice Off button. Pressing this button 3 second
	sec for	Ice Off button. Pressing this button 3 second
	sec for	locks the display panel and dispenser
	child lock)	locks the display panel and dispenser
	child lock)	buttons so the buttons can not be used.The
		Child Lock icon lights up to indicate you’ve
		activated the Child Lock function.

(7)Cubed Ice Press the Cubed Ice or Crushed Ice button

	(8) Crushed	to select the type of ice you want dispensed.
	Ice	Each time you press the button, the cubed
	Ice	and crushed ice modes alternate and
		and crushed ice modes alternate and
		the Cubed or Crushed ice icon lights up,
		indicating your selection.
	(Cubed) (Crushed)	If you don’t need ice, turn the function off to
	(Cubed) (Crushed)	save on water and energy consumption (See
		Ice Off below).
		Cooling Off mode (also called Shop mode),
	Cooling Off	Cooling Off mode (also called Shop mode),
	Mode	is designed for use by retailers when they
		are displaying refrigerators on the shop
		are displaying refrigerators on the shop
		ﬂ oor. In Cooling Off mode, the refrigerator's
		fan motor and lights work normally, but the
		compressors do not run, and the refrigerator
		and freezer do not get cold.
		To start Cooling Off mode, press and hold
		the Energy Saver button and the Power
		Freeze button for 3 seconds during normal
		operation. The refrigerator chime sounds and
		the temperature display ﬂ ashes OF OF.
		To cancel Cooling Off mode, press and hold
		the Energy Saver and the Power Freeze
		buttons again for 3 seconds.

02 OPERATING

in continuous mode so that it stays on

continuously. The button also lights up. If you

want the Dispenser lamp to come on only

when some one uses the dispenser, press

the Lighting button to turn the continuous

mode off.

( 9 ) Ice Off

If you don’t want to make more ice, press the Ice Off button.

The icon will light up and the Ice-Maker stops making ice.

We recommend you stop ice making if

( 5 ) Power

Cool

The Power Cool function substantially speeds up the refrigerator compressor, causing the refrigerator to cool down rapidly to a temperature you choose. When you press the Power Cool button, the Power Cool icon lights up.

Power Cool is useful if you need to quickly cool items or need to cool the refrigerator rapidly if it has warmed dramatically (for example, if the door was left open).

To turn off Power Cool, press the Power Cool button again. Power Cool turns off automatically after 2 1/2 hours to decrease energy consumption.

When you turn on Power Cool, the refrigerator's compressor speeds up and is louder than during normal operation.

the following occur:

-There is enough ice in the ice bucket.

-You want to save water and energy.

-Water is not being supplied to the refrigerator.

If the ice maker function is ON, and the water line is not connected, there will be a water valve noise from back of the unit. Press the Ice Off ( 6 ) button until the Ice Off indicator ( ) illuminates.

operating _13

DA68-01922A.indb 13

2013.3.4 1:32:47 PM