Philips 180MT manual Sound mode 11 Previous programme 12 Screen information, Programme List

TV Control

10Sound mode

11Previous programme

12Screen information

13Selecting TV programmes

14PC/TV mode selection

15Smart picture controls

16Numerical keys

17Programme List

●To switch from STEREO to MONO or to choose between Dual I and Dual II for bilingual transmissions.

For TV sets fitted with NICAM reception, depending on the transmission, you can switch from NICAM STEREO to MONO or choose between NICAM DUAL I, NICAM DUAL II and MONO.

●If using Teletext, press this button to display dual pages on screen.

To access the last programme viewed.

To display/clear the programme number, the name (if it exists), the time, the sound mode and the time remaining on the timer.

Hold down for 5 seconds to permanently display the programme number on the screen.

The volume level and the smart control adjustments are then displayed each time they are used.

To move up or down a programme.

The number, (the name) and the sound mode are displayed for a few seconds.

For some TV programmes the title of the programme appears at the bottom of the screen.

To select TV or PC mode

To select your desired picture setting from 5 picture settings: RICH, NATURAL, SOFT, MULTIMEDIA and

PERSONAL.

●For direct access to programmes

For a 2-digit programme number, the 2nd digit must be entered before the dash disappears.

●If using TV 'STANDBY', press any of number keys to return to 'ON'

To navigate through a list of installed programmes to obtain a quick overview of the programmes & activate the programmes you have selected.

file:///D/TV/english/180mt/osd/tv_control.htm (3 of 10) [4/2/2003 10:42:00 AM]