Philips 180MT manual Auto Program, Smart Help

Using other menus (NTSC_1)

1.Press the MENU button on the remote control to show the on-screen menu.

2.Press repeatedly until INSTALL is highlighted.

3.Press to shift the menu to the left.

4.Press once to highlight the TUNER MODE.

5.Press to highlight the tuner option.

6.With the TUNER MODE set to AUTO, Auto Program (see left) will detect whether or not cable input is present. If, however, you want to set the TUNER MODE to CABLE or ANTENNA,

press or until either CABLE or ANTENNA is highlighted.

7.Press the MENU button repeatedly to clear the menu from the screen.

Smart Help

When CABLE is selected, channels 1-125 are available. When ANTENNA is selected, channels 2-69 are available.

RETURN TO TOP OF THE PAGE

Auto Program

1.Press the MENU button on the remote control to show the on-screen menu.

2.Press repeatedly until INSTALL is highlighted.

3.Press to shift the menu to the left. LANGUAGE will be highlighted.

4.Press repeatedly until the AUTO PROGRAM control is highlighted.

5.Press to start the Auto Program scanning of channels.

6.Press the MENU button repeatedly to

file:///D/TV/english/180mt/osd/n_other.htm (2 of 7) [4/2/2003 10:42:41 AM]