Philips 180MT manual LCD Panel Technology, Return To Top Of The Page

FAQs (Frequently Asked Questions)

countries, Secam in France, the CIS and the majority of African countries The United States and Japan use a different system called NTSC.

Q:What is SCART?

A:The SCART is a 20-pin rectangular connector fitted to the vast majority of PAL market TV

receivers. It provides composite video inputs and outputs, stereo audio in and out, and RGB input. It is also known as Euro connector and PERI-tel.

Q:What are S-VIDEO Signals?

A:These are 2 separate Y/C video signals from the S-VIDEO and Hi-8 recording standards. The

luminance signals Y (black and white) and chrominance signals C (colour) are recorded separately on the tape. This provides a better picture quality than is achieved with standard video (VHS and 8

mm)where the Y/C signals are combined to provide only one video signal.

RETURN TO TOP OF THE PAGE

LCD Panel Technology

Q:What is a Liquid Crystal Display?

A:A Liquid Crystal Display (LCD) is an optical device that is commonly used to display ASCII

characters and images on digital items such as watches, calculators, portable game consoles, etc. LCD is the technology used for displays in notebooks and other small computers. Like light-emitting diode and gas-plasma technologies, LCD allows displays to be much thinner than cathode ray tube (CRT) technology. LCD consumes much less power than LED and gas-display displays because it works on the principle of blocking light rather than emitting it.

Q:How are LCDs made?

A:LCDs are created from two glass plates separated from each other at a distance of a few

microns. The plates are filled with liquid crystal and then sealed together. The top plate is coloured with an RGB pattern to make the colour filter. Polarizers are then glued to both plates. This combination is sometimes called 'glass' or 'cell.' The LCD cell is assembled into a 'module' by adding the backlight, driver electronics and frame.

file:///D/TV/english/180mt/safety/saf_faq.htm (5 of 8) [4/2/2003 10:42:12 AM]