Samsung RF4287HAWP, RF4287HABP user manual Disassemble the Flex Door, Assemble the Flex Door

DISASSEMBLE THE FLEX DOOR

1. Take out the Flex Zone ( 1 ) by lifting it

ASSEMBLE THE FLEX DOOR

To reattach the fl ex doors, assemble parts in reverse order.

up.

1

Be sure to connect the Flex Door Wire

CAUTION Connector.

If it is not connected, the Flex Room does not work.

2. Take off the cover
( 2 ) w/harness with a	2
fl at-blade screwdriver
(-).

3.Press the locking tab and separate the Wire Connector.

DISASSEMBLE THE FREEZER DRAWER

1. Take out the upper drawer by lifting it up.

2.Remove the tilting pocket ( 1 ) by pulling both support guards ( 2 ) aside. And take out both support guards by pulling them aside.

When reassembling it, be sure to connect the

CAUTION wire harness.

If it is not connected, the Flex Room does not work.

4. Remove 2 hex head bolts from sides with a socket wrench (10mm).

5. Lift up the Flex door from the rails.

Putting too much food into the freezer

CAUTION drawers can prevent the freezer from closing completely and

can cause frost build-up.

08_ setting up

1

2

3. Take out the lower
basket ( 3 ) by lifting	3
the basket up from
the rail system.

4. Remove 4 hex head bolts from both sides with a socket wrench (10mm).

5. Lift up the freezer door from the rails.

DA68-01922A.indb 08 2013.3.4 1:32:38 PM