Disassemble the refrigerator doors
Be careful not to drop and scratch the doors WARNING while removing the doors.
Disassemble the refrigerator doors
1.With the door opened, remove the cap top table ( 1 ) with a fl
2
1
2.Disconnect one connector ( 3 ) on the right side door and one connector ( 4 ) on the left side door. Remove the water line ( 5 ) while pressing the dark gray color part ( 6 ) of the water line coupler.
| 4 |
Red Clip | 3 |
(1/4") |
5
6
If a red clip is on the coupler, it must be CAUTION removed before removing the tube.
3.Remove the 3 hex head bolts ( 7 ) attached to the upper left and right door hinges with a socket wrench (10mm). Remove the ground screw ( 8 ) attached to the upper left and right door hinges with a philips screwdriver (+). Remove the upper left and right door hinges ( 9 ).
Socket wrench
8
7
9
4.Lift the door straight up to remove.
5.Remove the screw ( 10 ) attached to the lower left and right door hinges with a philips screwdriver (+). Remove the 2 hex head bolts ( 11 ) attached to the lower left and right door hinges with an allen wrench (3/16”). Remove the lower left and right door hinges ( 12 ).
12
10
11
Allen wrench
REATTACHING THE REFRIGERATOR DOORS
To reattach the fridge doors, assemble parts in reverse order.
1.The Water Line must be fully inserted to the center of transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser.
2.Insert the clip in the install pack and check that it holds the line fi rmly.
Type A |
|
| Type B | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Dispenser | |
Center of Transparent coupler | The Guide Lines | |
| ||
clip A (1/4”) | clip A (1/4”) | |
(6.35mm) | ||
(6.35mm) | ||
|
setting up _07
01 SETTING UP
2013.3.4 1:32:33 PM |
