Checking the remote controller
•Point the remote controller towards the remote controller receiver of the indoor unit.
•When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit indicator() appears on the remote controller display.
Remote controller buttons
Remote controller display
Virus Doctor
Set the Virus Doctor function on/off.
Fast / Comfort
Select Fast function or Comfort function
Single User
Turn on/off the Single User function which reduces energy usage while operating in cool/heat mode.
Temp + -
Increase/Decrease the temperature by 1 ˚C.
Auto Clean
Auto clean function – Dry inside of the indoor unit to get rid of odor. d'light Cool
The d'light Cool function is not available for this model.
On Timer
Set the On Timer on.
OffTimer
Set the Off Timer on.
Filter Reset
Reset the Filter Clean reminder
Usage
Display the usage time for few seconds on the indoor unit display:
Power
Turn on/off the air conditioner.
Mode
Set one of the 5 operating modes (see pages 16~17 for instructions).
Quiet
The Quiet function is not available for this model.
Vertical air swing
Activate/Deactivate air flow blade movement automatically up and down.
Fan
Adjust how much air flows through the air conditioner with the 5 different fan speeds such as Auto/Low/Medium/High/Turbo.
Horizontal air swing
Activate/Deactivate air flow blade movement automatically left and right.
Set the | mode on. |
|
Set/Cancel |
|
|
Set/Cancel the timer/ | mode. |
SMART Air conditioner Network.
The SMART Air conditioner Network is not available for this model.
2ndF
Switch the function of the button on the remote controller.
Display off
To turn off the display light
Beep off
To silence the beep sound when pressing the button.
• When you press 2ndF button, theindicator will be displayed on the remote controller and you can change the functions on the remote controller as listed below.
Single User Filter Reset, d'light Cool Usage, Auto Clean Beep Off, good’sleep Display Off function.
If you select the function under the button while the function of the button is switched by 2ndF button, the 2ndF function is canceled.
|
| 17/09/2013 11:23:10 | |
|
| ||
|
|
|
|