Connecting the assembly cable

When you install the unit, make first refrigerant connections and then electrical connections. Connect the air conditioner to grounding system before performing the electrical connection. If unit is uninstalled, first disconnect electrical cables, then refrigerant connections.

If the outdoor unit is more than 5 meters away from the indoor unit, you must extend the cable. The maximum length of the cable is 15(18) / 20(24) meters.

1. Extend the assembly cable if necessary.

• Do not connect two or more different cables to extend the length. It may cause fire.

2 . Open the cover panel.

3 . Remove the screw securing the connector cover.

4 . Pass the assembly cable through the rear of the indoor unit and connect the assembly cable to terminals. (Refer to the picture below)

• Each wire is labeled with the corresponding terminal number.

5 . Pass the other end of the cable through the 65 mm hole in the wall.

6 . Close the connector cover by tightening the screw carefully.

7 . Close the cover panel.

8 . Remove the terminal board cover on the side of the outdoor unit. 9. Connect the cables to the terminals as seen in the picture.

t05s In llan atio

18HC

Indoor unit

Indoor unit

Outdoor unit

24HC

Outdoor unit

GroundWire (Green/Yellow)

GroundWire (Green/Yellow)

18HP

Indoor unit

Ground wire

(Green/Yellow)

 

 

Ground wire

 

(Green/Yellow)

24HP

Outdoor unit

 

 

Ground wire

 

(Green/Yellow)

 

 

 

Ground wire

 

 

(Green/Yellow)

• Also circular terminal must be matched with screw size in terminal block.

• After connecting the cables, make sure terminal numbers on the indoor/outdoor unit matches.

Please ensure that Power & Communication cables are separated, they must not be in the same cable.

10.Connect the grounding conductor to the grounding terminals.

11.Close the terminal board cover by tightening the screw carefully.

Connect the wires firmly so that wires can not be pulled out easily.

(If they are loose, it could cause burn-out of the wires.)

Connect the wires according to color codes, referring to the wiring diagram.

The power cable and the interconnection cable should be selected according to the specification in page 40.

English-41

MG_BETTER_A3050_IB&IM_EN_DB68-04070A-00.indd 41

17/09/2013 11:23:35

Page 41
Image 41
Samsung AR18HCSDBWKNMG, AR24HCSDBWKNMG, AR18HPSDBWKNMG, AR18HCSDBWKXMG English-41, Extend the assembly cable if necessary

AR24HPSDBWKNMG, AR24HCSDBWKXMG, AR18HPSDBWKXMG, AR18HCSDBWKNMG, AR18HPSDBWKNMG specifications

Samsung has long been a leader in home appliances and HVAC solutions, and their range of air conditioners, including the AR18HCSDBWKXMG, AR24HPSDBWKXMG, AR24HCSDBWKNMG, AR18HPSDBWKNMG, and AR18HCSDBWKNMG, is no exception. These models combine innovative technology with user-friendly features to provide efficient cooling and heating options for any space.

One of the standout features of these models is Samsung's Digital Inverter technology. This technology allows the air conditioners to adjust their compressor speed to maintain the desired temperature more efficiently. By reducing energy consumption, the Digital Inverter technology not only helps in lowering utility bills but also minimizes noise levels, providing a more comfortable environment.

Another important aspect is the Smart Installation feature, which simplifies the setup process. Once the unit is installed, the system runs a diagnostic check to ensure everything is functioning correctly. This feature helps users avoid potential issues and provides peace of mind regarding their investment in a Samsung air conditioner.

The AR series also comes with Samsung's unique Wind-Free cooling technology. This innovation ensures that cool air is distributed uniformly throughout the room without the discomfort of cold drafts. The air flows through micro holes in the front panel, providing a gentle and consistent cooling experience.

Energy efficiency is a top priority for modern consumers, and these Samsung air conditioners are designed with eco-friendly R32 refrigerant. This refrigerant has a lower Global Warming Potential (GWP) compared to traditional refrigerants, making it a more sustainable choice for the environment.

In terms of design, these models boast a sleek and modern aesthetic that fits seamlessly into any interior decor. The easy-to-clean filters and anti-bacterial coating ensure that the air quality in your home is not compromised, providing a healthy living environment for you and your family.

Moreover, user convenience is enhanced with the presence of smart controls via Samsung's SmartThings app. Users can easily monitor and control their air conditioners from their smartphones, allowing for precise temperature management and efficiency even when away from home.

In conclusion, the Samsung AR18HCSDBWKXMG, AR24HPSDBWKXMG, AR24HCSDBWKNMG, AR18HPSDBWKNMG, and AR18HCSDBWKNMG air conditioners are designed with cutting-edge technology, energy efficiency, and user-friendly features in mind. These models not only enhance home comfort but also promote sustainability, making them an excellent choice for modern households looking to balance performance with environmental responsibility.