Fixing the indoor unit in place

Perform the following work on the area where gas leak test was done priory.

After checking for gas leaks in the system, insulate the pipe, hose and cables. Then place the indoor unit on the installation plate.

1.To minimise condensation problems, wrap foam insulation (as shown in the figure) on a part without insulation on the end of the pipes.

2.Wind the pipe, assembly cable and drain hose with vinyl tape.

3.Place the bundle (the pipe, assembly cable and drain hose) in the lower part of the indoor unit carefully so it does not project from the rear of the indoor unit.

4.Hook the indoor unit to the installation plate and move the unit to the right and left until it is securely in place.

• Make sure pipe does not move when you install the indoor unit on an installation plate.

5.Wrap the rest of the pipe with vinyl tape.

6.Attach the pipe to the wall using clamps (optional).

Insulation

Pipes

 

Installation

 

plate

Connecting

Vinyl tape

pipes

Connecting wires

 

Drain hose

 

Fixing the outdoor unit in place

Install the outdoor unit in level on a stable base to help avoid the generation of noise and vibration, especially when installing the unit close to a neighbor.

If you install the outdoor unit in a place exposed to strong winds or at a height, fix it to an appropriate support (wall or ground).

1.Place the outdoor unit as indicated on the top of the unit to let the discharged air out properly.

2.Fix the outdoor unit in level to an appropriate support using anchor bolts.

3.If the outdoor unit is exposed to strong winds, install shield plates around the outdoor unit so that the fan can operate correctly.

• Secure the rubber leg to help prevent the generation of noise and vibration.

'X' mm

'Y' mm

 

 

Rubber leg

 

Model

X

Y

18HC 602 310

18/24

660

340

Outdoor unit installed on the wall by rack

Ensure the wall will be able to suspend the weight of rack and outdoor unit;

Install the rack close to the column as much as possible;

Install proper grommet in order to help reduce noise and residual vibration transferred by outdoor unit towards wall.

Designed to cut off residual vibration from outdoor unit to rack.

(not supplied with product)

Soft rubber designed to cut off vibration from rack to wall. (not supplied with product)

English-50

MG_BETTER_A3050_IB&IM_EN_DB68-04070A-00.indd 50

17/09/2013 11:23:40

Page 50
Image 50
Samsung AR18HPSDBWKNMG Fixing the outdoor unit in place, Outdoor unit installed on the wall by rack, English-50, 660 340

AR24HPSDBWKNMG, AR24HCSDBWKXMG, AR18HPSDBWKXMG, AR18HCSDBWKNMG, AR18HPSDBWKNMG specifications

Samsung has long been a leader in home appliances and HVAC solutions, and their range of air conditioners, including the AR18HCSDBWKXMG, AR24HPSDBWKXMG, AR24HCSDBWKNMG, AR18HPSDBWKNMG, and AR18HCSDBWKNMG, is no exception. These models combine innovative technology with user-friendly features to provide efficient cooling and heating options for any space.

One of the standout features of these models is Samsung's Digital Inverter technology. This technology allows the air conditioners to adjust their compressor speed to maintain the desired temperature more efficiently. By reducing energy consumption, the Digital Inverter technology not only helps in lowering utility bills but also minimizes noise levels, providing a more comfortable environment.

Another important aspect is the Smart Installation feature, which simplifies the setup process. Once the unit is installed, the system runs a diagnostic check to ensure everything is functioning correctly. This feature helps users avoid potential issues and provides peace of mind regarding their investment in a Samsung air conditioner.

The AR series also comes with Samsung's unique Wind-Free cooling technology. This innovation ensures that cool air is distributed uniformly throughout the room without the discomfort of cold drafts. The air flows through micro holes in the front panel, providing a gentle and consistent cooling experience.

Energy efficiency is a top priority for modern consumers, and these Samsung air conditioners are designed with eco-friendly R32 refrigerant. This refrigerant has a lower Global Warming Potential (GWP) compared to traditional refrigerants, making it a more sustainable choice for the environment.

In terms of design, these models boast a sleek and modern aesthetic that fits seamlessly into any interior decor. The easy-to-clean filters and anti-bacterial coating ensure that the air quality in your home is not compromised, providing a healthy living environment for you and your family.

Moreover, user convenience is enhanced with the presence of smart controls via Samsung's SmartThings app. Users can easily monitor and control their air conditioners from their smartphones, allowing for precise temperature management and efficiency even when away from home.

In conclusion, the Samsung AR18HCSDBWKXMG, AR24HPSDBWKXMG, AR24HCSDBWKNMG, AR18HPSDBWKNMG, and AR18HCSDBWKNMG air conditioners are designed with cutting-edge technology, energy efficiency, and user-friendly features in mind. These models not only enhance home comfort but also promote sustainability, making them an excellent choice for modern households looking to balance performance with environmental responsibility.