Using the Single User function
This function will reduce the energy usage while the air conditioner is operating in Cool/Heat mode.
Press the Single User button on the remote controller while the air conditioner is operating in Cool/Heat mode.
" " appears on the remote controller display for few seconds and disappears.
Single User indicator and air swing indicator appear automatically on the remote controller display.
The air flow blades move up and down.
If the current set temperature is lower than 24°C in Cool mode, it will be automatically raised to 24 °C.
Cancel Press the Single User button once again.
• Single User function is only available in Cool/Heat mode.
• When Single User function is activated in Cool mode, temperature range will be limited to 24 °C~30 °C. However, temperature range during Heat mode will remain same at 16 °C~30 °C.
•If the desired temperature is lower than 24 °C in Cool mode, turn off the Single
User function by pressing the Single User button again.
•Temperature/Fan speed can also be adjusted (see page 17 for instructions).
•Air flow can be adjusted. (see page 18 for instruction).
•If you press the Mode button while the Single User function is on, it will cancel the function.
tio n Advancedun03f c
Using the Virus Doctor function
This function will produce positive ions and supply them into the airflow.
Press the
button on the remote controller.
indicator will appear on the remote controller display and the air conditioner generates Virus Doctor.
Virus Doctor Lamp on the indoor unit will turn on when the Virus Doctor function is on and it will turn off when the function is canceled.
Cancel Press the 
button once again.
• The Virus Doctor | function can be selected whether the air conditioner is |
on/off. |
|
•The Virus Doctor
function may not be available for some models.
17/09/2013 11:23:21 |