JVC rx-8010vbk AV Compu Link Remote Control System, Connections 1 AV Compu Link Connection, Vcr

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player) through the receiver.

This receiver is equipped with the AV COMPU LINK-III, which added a function to operate JVC video components through the video components terminals. To use this remote control system, you need to connect the video components you want to operate, following the diagrams below and the procedure on the next page.

CONNECTIONS 1: AV COMPU LINK Connection

VCR 1 DVD player

TV

VHS

DVD

AV

COMPU LINKAV

CAUTION:

You can only connect to the TV

AV

COMPU LINK III

with the AV COMPU LINK EX or

COMPU LINK

IMPORTANT:

The AV COMPU LINK remote control system cannot control the DBS tuner connected to the TV SOUND/DBS and DBS component video terminals, and video components connected to the VIDEO and VCR 2 terminals on the receiver.

AV COMPU LINK EX

AV

COMPU LINK III

AV COMPU LINK III terminal. DO NOT connect to the TV with

AV COMPU LINK RECEIVER/ AMP terminal.

Notes:

•When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic Selection of TV’s Input Mode (see page 48).

•When connecting only the VCR 1 or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.

•Refer also to the manuals supplied with your video components.

CONNECTIONS 2: Video Cable Connection

This receiver is equipped with three types of the video terminals — S-video, composite video, or component video, and the signa ls coming into this receiver through one type of video terminals can output only through the same type of the terminal. So you need to connect the VCR and/or DVD player to the TV using one of the following three ways:

CASE 1	When connecting the source equipment to the receiver using the S-video terminals, connect also this
	receiver to the TV’s Video Input 1 terminal using S-video cables.
		Source		RX-8010VBK		TV
		Equipment	S-video cable		S-video cable
	Note:					To Video Input 1
	If you connect the DVD player and the DBS tuner to this receiver using the S-video terminals, change the video input
	terminal setting to "S/C" (see page 16).
CASE 2	When connecting the source equipment to the receiver using the composite video terminals, connect also
	this receiver to the TV's Video Input 2 terminal (composite video input) using composite video cables.
		Source		RX-8010VBK		TV
		Equipment	Composite		Composite
			video cable		video cable
	Note:					To Video Input 2
						(Composite)
	If you connect the DVD player and the DBS tuner to this receiver using the composite video terminals, change the video
	input terminal setting to "S/C" (see page 16).
CASE 3	When connecting the source equipment to the receiver using the component video terminals, connect also
	this receiver to the TV's Video Input 2 terminals (component video input) using component video cables.
		Source		RX-8010VBK		TV
		Equipment	Component		Component
			video cable		video cable
						To Video Input 2
	Note:					(Component)
	If you connect the DVD player and the DBS tuner to this receiver using the video component terminals, change the
	video input terminal setting to "COMPNT" (see page 16).

47