JVC rx-8010vbk manual Adjust the overall levels of the effect, 3D Action or 3D Digital, Speaker

4. Adjust the overall levels of the effect.

1)	Press EFFECT repeatedly until	EFFECT	SETT
	“EFFECT” appears on the display.
	The display shows the current setting.
2)	Press CONTROL UP 5/DOWN °	CONTROL
	to select the effect level you want.	DOWN	UP

•Each time you press the button, the display changes to show the following:

EFFECT 1 EFFECT 2 EFFECT 3

EFFECT 5 EFFECT 4

As the number increases, the selected 3D effect mode becomes stronger. (Normally set it to “EFFECT 3.”)

From the remote control:

1. Press DSP MODE repeatedly until	DSP
“3D ACTION” or “3D DIGITAL”	MODE
appears on the display.

The DSP MODE lamp on the front panel button lights up, and the 3D-PHONIC and DSP indicators also light up on the display.

2.	Press SOUND.	SOUND
	The 10 keys are activated for sound
	adjustments.
3.	Press CENTER to select the center	∗CENTER
	speaker.	9

•“CTR” appears on the remote control display window.

4.	Press LEVEL +/– to adjust the	+∗BAL L
	center speaker output levels (from	CH/∗LEVEL
	–10 dB to +10 dB).
		−∗BAL R
5.	Press SOUND.	SOUND

6. Press CTR TONE to select the	CTRTONE
center tone level you want.	5 ENTER

•Each time you press the button, the display changes to show the following:

CTR TONE 1 CTR TONE 2 CTR TONE 3

(Softer)(Soft)(Flat)

CTR TONE 5	CTR TONE 4
(Sharper)	(Sharp)

To make the dialogue softer, select “CTR TONE 1” or “CTR

TONE 2.”

To make the dialogue clearer, select “CTR TONE 4” or “CTR TONE 5.”

When “CTR TONE 3” is selected, no adjustment is applied.

7. Press EFFECT to adjust the	EFFECT
overall level of the effect.	2

•Each time you press the button, the effect level changes as follows:

EFFECT 1 EFFECT 2 EFFECT 3

EFFECT 5 EFFECT 4

As the number increases, 3D effect mode becomes stronger. (Normally set it to “EFFECT 3.”)

34