Adjusting the Equalization Pattern
(Also see page 15)
1. Press MENU.
The MENU appears on the TV.
•Pressing one of the 5/ °/ 2/ 3buttons also displays the MENU.
2.Press 5 / ° to move 
to “SOUND CONTROL,” then press 2/ 3.
The SOUND CONTROL menu appears.
3. Press 5 / ° to move to “DIGITAL EQ,”
For Surround mode, Surround mode with DAP
mode: |
|
“TEST TONE”: | Output a test tone. |
“L/R BALANCE”: | Adjust the right and left balance |
| of the front speakers. |
“CENTER LEVEL”: Adjust the center speaker output level. *
“REAR L LEVEL”: Adjust the left rear speaker output level. **
“REAR R LEVEL”: Adjust the right rear speaker output level. **
“SUBWFR LEVEL”: Adjust the subwoofer output level. ***
then press 2/ 3.
For DAP mode:
“L/R BALANCE”: Adjust the right and left balance
The DIGITAL EQ menu appears.
4. Press 5/ °to move 
to the frequency you want to adjust.
5. Press 2/ 3to adjust | |
the frequency level you |
|
want. |
|
The frequency level changes by 2 dB from
6.When you finish, press EXIT repeatedly until the menu disappears from the TV.
Adjusting the Surround and DSP Modes
(Also see pages 27 – 34)
You can use a Surround mode with a DAP mode, but not with the 5 CH/4 CH Stereo mode and 3D PHONIC mode.
1. Press MENU.
The MENU appears on the TV.
•Pressing one of the 5/ °/ 2/ 3buttons also displays the MENU.
2.Select Surround mode and/or DSP mode you like to adjust (see page 36).
3.Press 5 / ° to move
to “SOUND |
of the front speakers.
“CENTER LEVEL”: Adjust the center speaker output level. *
“REAR L LEVEL”: Adjust the left rear speaker output level. **
“REAR R LEVEL”: Adjust the right rear speaker output level. **
“SUBWFR LEVEL”: Adjust the subwoofer output level. ***
For 5 CH/4 CH Stereo mode:
“L/R BALANCE”: Adjust the right and left balance of the front speakers.
“CENTER LEVEL”: Adjust the center speaker output level. ****
“REAR L LEVEL”: Adjust the left rear speaker output level. **
“REAR R LEVEL”: Adjust the right rear speaker output level. **
“SUBWFR LEVEL”: Adjust the subwoofer output level. ***
For
“L/R BALANCE”: Adjust the right and left balance of the front speakers.
“CENTER LEVEL”: Adjust the center speaker output level. *
“SUBWFR LEVEL”: Adjust the subwoofer output level.***
For Surround off and DSP OFF:
CONTROL,” then press 2/ 3.
The SOUND CONTROL menu appears.
4. Press 5 / ° to move
to “LEVEL ADJUST,” then press
2/ 3.
“L/R BALANCE”: Adjust the right and left balance of the front speakers.
“SUBWFR LEVEL”: Adjust the subwoofer output level.***
Notes:
* | You cannot select “CENTER LEVEL” when “CTR SPK” is set |
| to “NONE” (see page 17). |
** | You cannot select “REAR L LEVEL” and “REAR R LEVEL” |
| when “REAR SPK” is set to “NONE” (see page 17). |
The LEVEL ADJUST menu appears.
5. Press 5 / ° to move | |
to the item you want to |
|
set or adjust, then press 2/ 3. |
|
On these adjustment menus, you can do the followings:
*** You cannot select “SUBWFR LEVEL” when “SUBWOOFER” |
is set to “NO” (see page 17). |
**** You cannot select “CENTER LEVEL” when 4 CH Stereo |
mode is selected. |
6. Press EXIT once. |
37
