Installing the unit

IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines. Always disassemble the electric lines before the refrigerant tubes.

Upon receipt, inspect the product to verify that it has not been damaged during transport.

If the product appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the installer or the authorized technician has collected the material from the retailer.)

After completing the installation, always carry out a functional test and provide the instructions on how to operate the air conditioner to the user.

Do not use the air conditioner in environments with hazardous substances or close to equipment that release free flames to avoid the occurrence of fires, explosions or injuries.

To help prevent injury when accidentally touching the indoor unit fan, install the indoor unit at least 2.5 m above the floor.

The air conditioner should be used only for the applications for which it has been designed : the indoor unit is not suitable to be installed in areas used for laundry.

Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility from both sides or ability to perform routine maintenance and repairs. The units’components must be accessible and that can be disassembled in conditions of complete safety either for people or things.

For this reason, where it is not observed as indicated into the Installation Manual, the cost necessary to reach and repair the unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any other means of elevation won’t be considered in-warranty and charged to end user.

Power supply line, fuse or circuit breaker

Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in compliance with current local safety standards.

Always verify that a suitable grounding connection is available.

Verify that the voltage and frequency of the power supply comply with the specifications and that the installed power is sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.

Always verify that the cut-off and protection switches are suitably dimensioned.

Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring diagram included in the manual.

Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric specifications and with the instructions provided in the wiring scheme.

Always verify that all connections comply with the standards applicable to the installation of air conditioners.

Choosing the installation location

Indoor unit

For Wi-Fi Air-conditioner installation, select indoor unit location near to wireless router.

In case Wi-Fi signal strength weakened , Smart APP may be disconnected depending on the Wi-Fi signal strength.

Where airflow is not blocked.

Where cool air can be distributed throughout the room.

Install the refrigerant piping length and the height difference of both indoor and outdoor units as indicated in the installation diagram.

Wall that prevents vibration and is strong enough to hold the product weight.

Out of the direct sunlight .

1 m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated).

As far away as possible from the fluorescent and incandescent lights (so that the remote controller can be operated well).

A place where the air filter can be replaced easily.

Don't install directly above electronics equipment as leaking water may cause damage if not serviced. (eg. Computers, TV, etc).

English-31

07stIn llan atio

MG_BORACAY_IB&IM_EN_DB68-05789A-00.indd 31

12/4/2015 4:47:59 PM

Page 31
Image 31
Samsung AR24KQFHCWKNMG Choosing the installation location, Installing the unit, Power supply line, fuse or circuit breaker

AR18KQFHCWKNMG, AR24KRFHCWKNMG, AR24KQFHCWKNMG, AR18KRFHCWKNMG specifications

Samsung has long been a frontrunner in the HVAC (Heating, Ventilation, and Air Conditioning) industry, and its innovative range of split air conditioners, including models AR18KRFHCWKNMG, AR24KQFHCWKNMG, AR24KRFHCWKNMG, and AR18KQFHCWKNMG, exemplifies the brand’s commitment to performance, efficiency, and comfort. These models serve varying room sizes and needs, making them ideal for residential and commercial spaces alike.

One of the standout features across these models is the advanced inverter technology. This technology allows the compressor to operate at variable speeds, adjusting to temperature fluctuations seamlessly. As a result, users benefit from higher energy efficiency and lower electricity bills, while also enjoying a consistent and comfortable indoor climate. The Digital Inverter technology reduces unnecessary energy consumption compared to traditional non-inverter models.

Another key feature of these air conditioners is the triple filtration system. Samsung’s air purifying filters capture dust, allergens, and harmful particles, ensuring a healthier environment. This system includes a reusable and washable filter that promotes ease of maintenance and extends the lifespan of the unit, which is ideal for users who prioritize cleanliness and air quality.

Additionally, noise reduction technology makes these models exceptionally quiet, enhancing user comfort. With operational noise levels kept to a minimum, individuals can enjoy a peaceful atmosphere whether at home or at work, making these units perfect for bedrooms and quiet environments.

These models are also equipped with Smart features, allowing remote control via a smartphone app. Users can monitor and adjust settings from virtually anywhere, adding convenience to their daily lives. The presence of one-touch controls simplifies the user experience, allowing for quick adjustments as needed.

Moreover, the sleek and modern design of the AR18KRFHCWKNMG, AR24KQFHCWKNMG, AR24KRFHCWKNMG, and AR18KQFHCWKNMG ensures that they blend well with contemporary interiors. Their aesthetic appeal, coupled with functional excellence, makes them an attractive addition to any space.

In conclusion, Samsung’s AR18KRFHCWKNMG, AR24KQFHCWKNMG, AR24KRFHCWKNMG, and AR18KQFHCWKNMG air conditioners stand out due to their innovative technologies, energy efficiency, advanced filtration systems, noise reduction capabilities, and smart functionality. These features, along with their stylish designs, make them an excellent choice for anyone looking to enhance their indoor comfort while prioritizing health and efficiency.