Remote controller display
Turbo indicator
Quiet indicator 
(Has no this function)
Smart Saver indicator
On Timer indicator 
Off Timer indicator 
indicator
Heat mode can be selected ARHPSeries.
Operation mode indicator
Low battery indicator
Transmit indicator Air swing indicator 
Fan speed indicator
Auto (Turbo)
Low
Medium
High
ENGLISH
As to ARHCSeries, don’t operate the air conditioner when the remote controller is set to Heat mode).
Battery changing time
When the battery is exhausted, (
) will be displayed in the remote controller display. When the icon appears, change the batteries. The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for long time, remove the batteries from the remote controller and store it.
Inserting the batteries
1.Push the lever as arrow indicates on the rear side of the remote controller and pull up.
2.Insert two AAA batteries.
Check and match
3.Close the cover by place it back to its original position.
You should hear click sound when the cover is locked properly.
• The signal may not be received well of electronic lighting style fluorescent lamps such as inverter fluorescent lamps
are in the same space.
• If other electrical products operate by the remote controller, call your nearest contact center.
9
