Selecting Energy Saving Mode
You can save energy in the Cool mode. If you select the Energy Saving mode, the temperature will rise.
1If necessary, press the 
button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected when the unit was last used.
◆ The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆ Plugged in
◆Stopped
| lt will start up normally after three minutes. | |
|
|
|
2 Press the |
| button. |
| ||
| ||
Result: | ◆ The indoor unit beeps. | |
| ◆ The air conditioner runs in the Energy saving mode. | |
| ◆ The outer air flow blade moves up and down. | |
◆To stop the Energy saving mode, press the 
again.
Note You can select the Energy saving mode only in the Cool mode.
3 To adjust the temperature, press the 
button one or more times until the required temperature is displayed.
4 To select the fan speed, press the | button one or more times until |
the required setting is displayed. |
|
5 To control the direction of the air flow, refer to page 15.
