
Quick start
This unit will resume recording pause mode about
0.6seconds after the LCD monitor is reopened.
≥ When in Quick Start Standby mode about 70% of the power used in Recording Pause mode is being consumed, so the recording time will be reduced.
≥ Start time will not shorten if there is no SD card inserted.
/
Start time will be shorten if the
¬Change the mode to
.
1 Select the menu. (l 29)
[SETUP] # [QUICK START] # [ON]
2 Close the LCD monitor while the mode is set to
.
≥If [ECONOMY] (l 31) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again.
≥Turn the unit off using the power button.
Quick power on
When the power is turned on with the mode set
to , the unit will enter the recording pause mode after about 1.9 seconds.
¬Change the mode to
.
Select the menu. (l 29)
[SETUP] # [QUICK POWER ON] # [ON]
≥This function’s default setting is [ON].
≥In the Quick power on mode, the zoom magnification becomes 1k.
The status indicator A flashes green and the unit goes into quick start standby mode.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put into recording pause.
≥Quick Start Standby Mode is canceled if jabout 5 minutes have elapsed
jmode is set to with the LCD monitor closed.
≥Time for Quick Start will be more than 0.6 seconds slower when the digital cinema is used.
≥It may take some time for Automatic White Balance to adjust.
≥In the Quick start mode, the zoom magnification becomes 1k.
41
VQT2H52