Panasonic HDC-TM15P, VQT2H52 Microphone level, Touch / to adjust the microphone input level, Auto

Models: VQT2H52 HDC-TM10PP HDC-TM15P HDC-SD10PP

1 152
Download 152 pages 3.67 Kb
Page 61
Image 61

Function

Effect/Setting method

Microphone level

[AUTO]:

AGC is activated, and the recording level is adjusted automatically.

[SETr]/[SET]:

The desired recording level can be set.

AGC: Auto Gain Control

When recording, the input level from the built-in microphones can be adjusted.

The Intelligent auto mode is set to off. (l 39)

1 Select the menu. (l 29)

[RECORD SETUP] # [MIC LEVEL] # [SETr ]/[SET]

2 Touch / to adjust the microphone input level.

ALeft

B Right

C Microphone input level

≥ Touch to activate/disactivate AGC.

When AGC is activated, the icon is surrounded by yellow and the amount of sound distortion can be reduced. When AGC is disactivated, natural recording can be performed.

≥ A gain value for each of the 2 directions is displayed. (The input level of the microphones cannot be set individually.)

≥ Adjust the microphone input level so that the last 2 bars of the gain value are not red. (Otherwise, the sound is distorted.) Select a lower setting for microphone input level.

3 Touch [ENTER] to determine the microphone input level and then touch [EXIT].

DMicrophone input level meter

61

VQT2H52

Page 61
Image 61
Panasonic HDC-TM15P, HDC-SD10PP, HDC-TM10PP Microphone level, Touch / to adjust the microphone input level, Auto, SETr /SET