Panasonic HDC-TM10PP Relay recording, Auto Ground, Directional Standby, Record Setup # AGS # on

Function

Effect/Setting method

/	It is possible to continuously record motion picture to an SD
Relay recording	card when there is no space available in the built-in memory.
	Select the menu. (l 29)
	[RECORD SETUP] # [RELAY REC] # [ON]
	≥	is displayed on the screen.	will disappear when space
		in the built-in memory is gone and the recording to the SD card
		starts.
	≥ It allows you to record only to SD card from built-in memory.
	≥ Relay recording can only be performed once.
	≥ Combine the scenes that were relay recorded using the
		[RELAY SCENE COMBINE] into the SD card. (l 88)
	≥ Once the relay recorded scene and the scene that was recorded
		on the SD card after that are combined into the SD card using the
		[RELAY SCENE COMBINE], it will be possible to perform the
		relay recording again. If the [RELAY REC] is set to [ON] without
		performing the [RELAY SCENE COMBINE], a message is
		displayed. You will be able to perform relay recording by touching
		[YES], but you will not be able to perform the [RELAY SCENE
		COMBINE] after that.
Auto Ground-	If the unit continues to be tilted upside down from the normal
Directional Standby	horizontal position while recording motion pictures, it is
(AGS)	automatically put into recording pause.
	Select the menu. (l 29)
	[RECORD SETUP] # [AGS] # [ON]

58

VQT2H52