Quick Guide
∫Charging the battery
Charging lamp [CHARGE] A
Lights up:
Charging
Goes off:
Charging completed
1Connect the AC cable to the AC adaptor and the AC outlet.
2Insert the battery into the AC adaptor by aligning the arrows.
∫Inserting the battery
Open the LCD monitor and install the battery by inserting it in the direction shown in the figure.
AInsert the battery until it clicks and locks.
∫Inserting/removing an SD card
Access lamp [ACCESS] A
≥When this unit is accessing the SD card or
12
1) Open the SD card cover by sliding the OPEN lever B.
≥While sliding the lever, push up on the SD card cover to open.
2) Insert/remove the SD card.
≥Face the terminal side C in the direction shown in the illustration and press it straight in as far as it will go.
≥Press the center of the SD card and then pull it straight out.
3) Return the SD card cover to its original position and press down to close.
≥Securely close it until it clicks.
∫How to turn on the power
Turning the power on and off with the power button
Press the power button to turn on the power.
AStatus indicator lights.
≥To turn off the power, hold down the power button until the status indicator goes off.
Turning the power on and off with the LCD monitor
Power is turned on when the LCD monitor is opened, and power is turned off when it is closed.
∫To turn on the power
AThe status indicator lights.
∫ To turn off the power
BThe status indicator goes off.
VQT2H52
