63
VQT2H52
Self-timer This is for recording still pictures using the timer.
Select the menu. (l29)
[PICTURE] # [SELF TIMER] # [10 SECONDS] or [2 SECONDS]
[10 SECONDS]: Records after 10 seconds
[2 SECONDS]: Records after 2 seconds
≥When the button is pressed, a still picture is recorded after
the Ø10 or Ø2 display and the recording lamp flash for the time
which has been set.
≥After recording, the self-timer is canceled.
≥In Auto focus mode, if the button is pressed halfway once
and then fully, the lens focuses on the subject when the button is
pressed halfway.
≥If the button is pressed fully all at once, the lens focuses on
the subject just before recording.
To stop the timer midway through
Press the MENU button.
Built-in flash When the button is pressed, the flash is activated and the
picture will be recorded. Use the built-in flash in order to record
still pictures in dark places.
Select the menu. (l29)
[PICTURE] # [FLASH] # [ON] or [AUTO]
≥This function’s default setting is [AUTO].
≥When the button is pressed halfway, the flash indicator will
appear on the screen.
[ON]: ß
[AUTO]: ��A
[OFF]:
≥The unit automatically determines if the flash is necessary even
when it has been set to [OFF] by detecting the ambient
brightness. (If it determines that the flash is necessary, the
indication lights up in red when the button is pressed
halfway.)
∫To adjust the brightness of the flash
≥The Intelligent auto mode is set to off. (l39)
Select the menu. (l29)
[PICTURE] # [FLASH LEVEL] # desired setting
[ßj]: Less bright
[ßd0]: Normal
[ßi]: Much brighter
Function Effect/Setting method
HDCSD10_TM10_TM15P-VQT2H52_eng.book 63 ページ ２００９年７月６日 月曜日 午後１時４６分