37
VQT2H52
Perform the touch screen calibration if a different
object to the one touched is selected.
1Select the menu. (l29)
Touch [ENTER].
2Touch the [_] with the supplied
stylus pen and enter in
calibration.
Touch the [_] in the order it is displayed.
(5 locations)
3Touch [ENTER].
Calibration cannot be performed when the LCD
monitor is turned 180o.
¬Change the mode to .
Rotate the LCD monitor towards the
lens side.
The image is horizontally flipped as if you see
a mirror image. (However the image recorded
is the same as a normal recording.)
Only some indications will appear on the
screen. When ° appears, return the direction
of the LCD monitor to normal position and
check the warning/alarm indication. (l122)

Touch screen calibration

[SETUP] # [CALIBRATION] # [YES]

Recording Yourself

HDCSD10_TM10_TM15P-VQT2H52_eng.book 37 ページ 2009年7月6日 月曜日 午後1時46分